Cleaning the home is a tedious task, but there is no excuse if you want a healthy and comfortable environment to live in. Fortunately, Bissell has made it much easier by allowing you to vacuum and mop your floors at once by using a vacuum-and-steam mop like Bissell CrossWave vs Symphony. So, between these two models, which one is better?
Continue reading below to learn further about:
– The design & dimensions of each vacuum-and-steam mop here
– Which model that is generally easier to use
– What accessories that are included with each model
– What surface types that these mops can work on
– The warranty of Bissell CrossWave vs Symphony
– Which vacuum-and-steam mop that is better for the money
Design and Dimensions
First of all, let’s take a look at the size and weight of these mops. They are quite close to each other, but Bissell CrossWave is a little bit bigger and heavier than Bissell Symphony. But the differences in their dimensions are very marginal, so you don’t need to worry too much. See also: Dyson V7 vs V8 Animal.
Bissell CrossWave measures 46 inches tall. It has a cleaning path that measures 12 inches wide, and a depth of 10.5 inches. The weight is about 11 lbs. This unit is colored in lime green and gray.
Bissell Symphony measures 46.5 inches tall and has a cleaning path that measures 11 inches wide, and a depth of 9 inches. The weight is about 10.1 lbs. This unit is colored in blue and gray.
In a glance, Bissell CrossWave vs Symphony look similar, as they both sport an upright design like a stick or upright vacuum. They are unique compared to regular vacuums because they are able to vacuum and mop. Each has the buttons for the power and cleaning mode placed on the handle to allow easy access. Each model has the dust cup placed in the center of the body. However, there is a small yet impactful difference in their dust cups.
The dust bin of Bissell CrossWave holds both the dirt and the dirty water from the cleaning session. As the effect, cleaning the dust bin may be a bit tricky and difficult. Meanwhile, the dust bin of Bissell Symphony only holds the dry dirt particles without any moisture, so it will be quite easier to empty and clean.
Ease of Use
After unboxing either of these vacuum-and-steam mops, the set-up process is fairly easy. You need to take out all of the parts, as they are wrapped individually. The whole set-up process takes less than two minutes. With Bissell CrossWave, you just need to slide the handle onto the mop’s body and screw it in. With Bissell Symphony, you just need to slide the body onto the cleaning head until you hear a snapping sound.
For the actual operation, Bissell CrossWave requires you to add some water along with the cleaning solution. Then, plug the power cord, select the cleaning mode, and start cleaning immediately. Once Bissell CrossWave is turned on, you need to press the trigger on the handle in order to release the cleaning solution to the brushroll. On the other hand, the actual operation of Bissell Symphony is pretty much similar – add the water, plug it in, and select the cleaning mode.
Bissell CrossWave has two tanks. The first one is the clean water tank, which can be removed for easy refilling. The second one is the dust bin which has a small latch to secure it in position. By switching this small latch, you can remove the dust bin in order to empty the debris particles and moisture into a trash can.
Bissell Symphony also has two tanks, the clean water tank and the dust bin. However, as mentioned above, the dust bin of this model is easier to clean, as it uses a dry tank technology. No moisture can get into the dust bin, so the debris particles sealed there are easier to empty. The dust bin is also secured with a small latch which you can switch around in order to release the dust bin.
In terms of maneuverability, Bissell CrossWave vs Symphony are pretty much similar. The weight difference between them is very marginal, and they both are quite lightweight. They each have a 25-ft power cord, which should be long enough to allow you to take care of a large room and reach far corners. However, they both are not really good in reaching tight spots and narrow corners.
The accessories that come with Bissell CrossWave and Bissell Symphony are similar. However, note that they are available in several different versions, which come with slightly different accessories.
The accessories that come with the standard Bissell CrossWave are:
– The multi-surface cleaning head. It is a brushroll that is designed to work on various types of surface. It works by agitating and lifting dirt and debris particles while at the same time mopping the floor.
– The cleaning solution. Different versions may come with different cleaning solutions. However, you can purchase a different cleaning solution, or even make a homemade cleaning solution which will probably be cheaper in the long run.
– The cleaning tray. You can put some water and cleaning solution into the tray, and then run the cleaning head into the tray in order to purge the brushroll.
– The filter. This filter is washable and replaceable. Although you can wash it after a cleaning session, keep in mind that it still wears over time and will eventually need to be replaced.
The accessories that come with the standard Bissell Symphony are:
– The cleaning pads. Bissell Symphony comes with two cleaning pads. The first one is smooth, designed for mopping. The second one is a scrubbing pad that is useful for removing a sticky residue or stubborn stain from the floor.
– The cleaning solution. As mentioned above, different versions come with different cleaning solutions, but you can make and use your own.
– The filter. This filter is also washable, but it will need to be replaced after some time.
Suitable Surface Types
Bissell CrossWave vs Symphony have different cleaning heads. The cleaning head of Bissell CrossWave has a motorized brushroll, so it is somewhat similar to a regular vacuum cleaner. Meanwhile, the cleaning head of Bissell Symphony looks like a steam mop, but with a vacuum head. Hence, they work in slightly different ways.
Bissell CrossWave is closer to the traditional vacuum head. The motorized brushroll will allow you to mop the floor with water and cleaning solution. Once turned on, the unit will spin while also generate a suction power. As you press the trigger on the handle, it will release the cleaning solution into the brush roll.
Because of this design, Bissell CrossWave is more versatile. It can be used to clean a variety of surface types, including rugs, carpets, and hard floors.
Bissell Symphony has a traditional steam mop look with a vacuum head. The front end of the cleaning head serves as a vacuum, while the rear end is where the cleaning pad is located. The cleaning pad is a flat pad which uses steam to clean and sanitize the floor.
However, Bissell Symphony can only be used on hard surfaces, such as hardwood, tile, and linoleum. It can’t be used on carpets or rugs.
In terms of performance, both models are good. However, they are only comparable when working over a hard floor surface. We can’t compare them over a carpet or rug surface because Bissell Symphony is not designed for such purpose.
Both models are capable of cleaning debris and liquid quickly. Bissell CrossWave can pick up most debris, mud, and various food/drink spills in one pass. There is just a minimal amount left, and you can pick them up as well in the second pass. So, the cleaning power is quite reliable.
Bissell Symphony is quite similar; however, it tends to take two or three passes to provide the best cleaning result, especially when dealing with liquid spills. This is because the steam cleaning pad tends to drag the liquid before it completely absorbs the spill. On the positive side, the steam cleaning pad works very well for scrubbing and capturing dried mud as well as food spills and stains.
Both models come with an excellent warranty. Each of them is backed by a 2-year warranty which covers all kinds of defect in the material and workmanship. The long warranty coverage should be enough to give you some peace of mind.
They also have a 30-day return period if purchased from Amazon. So, if you encounter any issue, you can return the product and get a refund. However, the return period may vary on different retailers.
Bissell CrossWave vs Symphony
|Name||Bissell CrossWave||Bissell Symphony|
|Features||- Vacuums and washes your floors at the same time. Surface Type: Bare Floors - Dual-action Multi-Surface brush roll Uses an innovative microfiber and nylon brush to mop and pick up dry debris at the same time||- Save time by vacuuming debris and steaming hard floors at the same time. Cleaning Path Width:11", Tank Capacity:12.8 oz - Sanitize with steam, using just water to eliminate 99.9% of germs and bacteria*. Surface Type:Hard Floors, Bare Floors. Power : 120 volts|
|Best Offer||Save Money Please click here||Save Money Please click here|
Between these two models, Bissell CrossWave is more recommended. This model is more versatile, as it can clean more types of surface. You can use it to clean carpets, rugs, as well as hard floors. In addition, the overall cleaning performance is slightly better.