Posted By Admin
Bissell CrossWave vs Hoover FloorMate

When it comes to vacuum cleaners, Bissell and Hoover are two well-known names in the industry. In this article, we are going to compare two wet-dry vacuum cleaners from these companies, Bissell CrossWave vs Hoover FloorMate. Both products are popular in the market, but Bissell CrossWave is more expensive than Hoover FloorMate. So, which one is better for the money?

Below, we will discuss further about:
– The size and weight of each model
– The comparison of their design and appearance
– The water tank of Bissell CrossWave vs Hoover FloorMate
– Which model that is generally easier to use
– The comparison of their maneuverability and performance
– Which model that is more recommended for you

First, let’s take a look at the dimensions of these vacuum cleaners. A unit with a wide cleaning head will allow you to clean a wide area quickly, but a unit that is too bulky and heavy will be difficult to navigate through cramped rooms and hallways. So, you should carefully consider whether you really need a compact, lightweight vacuum cleaner or not. See also: Bissell CrossWave vs Symphony.

Bissell CrossWave is the slightly bigger model of the two. It measures 12 inches wide and 46 inches tall. Compared to Hoover FloorMate, it has a slightly wider cleaning head, which means that it is able to clean more area at once. It is also taller, and the extra height is highly beneficial for a tall user.

Although the body is slightly bigger, the weight of Bissell CrossWave with empty tanks is actually only 11 lbs. If you fill the cleaning solution tank, the weight is still under 12 lbs. So, this model is quite lightweight. It is quite portable. The power cord length is 25-ft, so it will allow you to reach far corners easily.

Hoover FloorMate is smaller and slimmer. It measures 11.5 inches wide and 43 inches tall. The cleaning head is a little bit narrower than Bissell CrossWave vs Hoover FloorMate. The height of the handlebar is suitable for people with an average physicality, but it may be a bit too short for a tall user.

Despite the smaller and slimmer body, Hoover FloorMate is actually heavier. With empty tanks, it weighs about 13.8 lbs. With a full cleaning solution tank, it weighs about 16.9 lbs. Hence, it is not very practical and portable. The heavy weight may bring unnecessary difficulties when you need to lift the unit and take it around the home. The power cord length is 20-ft, which is good, although not as long as its competitor here.

Design & Appearance
In terms of design, these two models share some similarities. They both look more like stick vacuums than mops. However, they each also have several distinctive features that make them quite unique.

Both models have transparent cleaning heads. So, with either vacuum, you will be able to see whether the brushroll/scrubber has been soaked with the cleaning solution or not. You can start cleaning when the brushroll/scrubber is already primed with the cleaning solution properly. Both models have their power buttons placed on their handlebars to allow easy on and off.

Bissell CrossWave looks modern and fresh, featuring a nice combination of lime green and gray across most of the body. It has two tanks that are placed on the front and rear. The front tank is for storing the dirty water along with the debris, whereas the rear tank is for holding the cleaning solution and clean water.

Bissell CrossWave works by combining a multi-surface brushroll with some suction power. The brushroll works with the cleaning solution to agitate stubborn dirt particles and stains, and then the suction picks up the debris along with the dirty water. Hence, Bissell CrossWave can also be used as a regular vacuum for capturing large debris from hard floor surfaces as well as area rugs. It has three brushroll types for hardwood floor, area rug, and multi-surface.

Hoover FloorMate also has a modern appearance, but most of the body is gray with just a few parts colored in green. Just like Bissell CrossWave, Hoover FloorMate also has two water tanks. However, the water tanks are placed on the sides. The water tank on the left-hand side is for the cleaning solution and clean water, whereas the right one is for the dirty water and debris.

Hoover FloorMate is quite different. It utilizes a rotating scrubber to clean the floor surface. The cleaning solution is sent to the cleaning head, so that the scrubber can apply the cleaning solution directly when working. However, Hoover FloorMate can’t be used as a vacuum. The scrubber can pick up some debris particles, but it doesn’t have a vacuum pathway. Also, it only has two scrubber types for hardwood floor and multi-surface; it doesn’t clean rugs or carpets.

Water Tank
The next difference between Bissell CrossWave vs Hoover FloorMate is the water tank capacity. In general, a larger water tank is better because it will allow you to continue cleaning your home without having to stop momentarily to refill. That said, a large water tank that is fully filled can add a significant weight to the unit and make the unit difficult to use.

Bissell CrossWave has a water tank capacity of 0.4 L (13.5 fl oz). Indeed, this is pretty small. If you have a very large house, you probably will need to do several times of refill. However, it should be enough for cleaning one room or two. The benefit of the relatively small capacity is that the unit can remain lightweight and portable, hence allowing you to navigate and maneuver easily.

Hoover FloorMate has a significantly bigger water tank, which has a capacity of about 1.4 L (47.3 fl oz). It is quite large, and it will allow you to clean the entire home without having to refill the unit (if your home isn’t so large). However, you should also consider the weight of the unit. It will be quite heavy, especially with a full water tank. So, it is not recommended if you prefer a lightweight unit.

Ease of Use
Bissell CrossWave is very easy and straightforward to set-up. After unboxing the package, you will find that the pieces are wrapped in individual bags, so you will need a few minutes to take them all out. However, the only assembly that you need to do is sliding the handle to the main part and screwing it, so you don’t need to worry about the set-up.

To start cleaning, you need to add the cleaning solution into the rear tank and then select the hard floor mode or the area rug mode. After selecting the operation mode, you need to pull the trigger to release the cleaning solution to the brushroll. Afterwards, you can mop your floors immediately. In order to empty the dirty tank on the front, you need to squeeze a latch and remove the tank from the unit.

Hoover FloorMate is pretty much similar. You also need to unwrap the pieces and then attach the handlebar and the cleaning head. The handlebar needs to be screwed, but the cleaning head only needs to be snapped to its place. To start cleaning, don’t forget to add the cleaning solution into the left tank.

However, there is only one operation mode on this model. It works on all hard floor surfaces. When you need some extra power to deal with a stubborn spot, you can press the clean boost button, which will add some extra cleaning solution and increase the scrubbing power – but this is not to be activated throughout the entire session. To remove the dirty tank on the right, you just need to squeeze the tab that secures the container in place.

Maneuverability & Performance
So, how is the performance of Bissell CrossWave vs Hoover FloorMate? Which model is able to deliver the best cleaning results? In general, both models are reliable for everyday cleaning. But there are some differences in their performance and cleaning results.

Bissell CrossWave is definitely better in terms of maneuverability. It is lighter, and it has a longer power cord. It can reach far areas easily. It has a direct-drive cleaning head which makes moving forward so smooth and effortless.

The performance of Bissell CrossWave is very impressive. It is able to pick up all mud and nearly all solid particles in one pass. It only takes two or three passes to pick up liquid spills and some of the more difficult debris. Unfortunately, just like many other vacuums and mops, it is not able to reach the edges of the room properly.

Hoover FloorMate is pretty good in terms of maneuverability. But it has a heavier body and a shorter power cord. It will require more effort to navigate, even though it does have a direct-drive cleaning head as well which allows easy forward motion.

The performance of Hoover FloorMate is good. It is also able to pick up most debris and liquid spills in one pass, and it only takes a few passes to deliver the best cleaning results. However, it is also unable to reach the edges of the room.

Bissell CrossWave vs Hoover FloorMate

NameBissell CrossWaveHoover FloorMate
Features- Vacuums And Washes Your Floors At The Same Time. Surface Type: Bare Floors - Multi-Surface Machine Cleans Both Sealed Hard Floors And Area Rugs- SpinScrub Brushes deliver the best clean while gently and safely scrubbing sealed wood, vinyl, tile and grout; Wheel Type: Soft - Dual Tank Technology - keeps clean and dirty water separate so you never put dirty water back on the floor

Best OfferSave Money Please click hereSave Money Please click here

Between these two models, Bissell CrossWave is more recommended. It is lighter and more portable, and it will allow you to navigate and maneuver throughout your home more easily. It is also more versatile, as it can clean hard floor surfaces as well as rugs or carpets. The overall cleaning performance is impressive.

Leave a comment

Your email address will not be published. Required fields are marked *